00971 4 267 4926

Direct to Substrate (DTS)

Bluefire TL2024UV is a high-speed UV flatbed inkjet printer designed for high volume printing requirements of ‘Promotional product market place’. This effectively fills the gap between slow, light duty inkjet printers and the high-end, expensive in-line machines. 

It is equipped with industrial, high resolution, piezo-electric gray scale print heads. Its rugged, industrial design allows continuous printing, 24 x 7, week after week. It comes with CMYK plus 2 highly opaque white inks in 1 litre bulk containers.

Bluefire TL2024UV is the best solution for personalized souvenirs and can accommodate a variety of printing materials owing to the highly efficient UV LED technology used for ink curing.

Benefits of UV LED technology:

UV LED technology is very eco-friendly solution with Zero emission of Mercurry, Ozone OR UVC rays. It is economical too, as there is very little maintenance like lamp replacement etc. It helps to reduce energy usage, offer consistent performance and have very long life cycle.

The state-of-the-art lamps facilitate ink curing at very high print speeds. 

Key advantages:

Highly productive – 540 x 640 mm area covered in 103 seconds!
Handles up to 2.95” tall materials
Industrial construction
Opaque white – single pass printing on dark substrates


5 colors (C, M, Y, K, W), 6 print heads (C, M, Y, K, W, W)
Highly opaque white – one-pass printing on dark substrates
1 litre main tank, Automatic ink supply system
Active negative pressure system

Single OR Double air cooled UV LED lamps

Eco-friendly: UV-LED curing technology deployed in TL2024UV does not emit any hazardous waste

DOD Piezo-electric gray scale print heads with automatic voltage & temperature control 
Variable dot size (7pl, 14pl, 21pl)
Staggered print head for simultaneous white and color printing
High speed uni- or bi-directional printing
Automatic print head maintenance module for purging, wiping & capping
Productivity mode : 8.3 sqm / hr. (1200 x 900 DPI, 6 Pass, Bi-directional )
Quality mode: 6.2 sq. m / hr. (1200 x 1200 DPI, 8 pass, Bi-directional)

Accepts media up to 2.95” thickness
Auto detection of media thickness
Supports wide variety of media - PVC, wood, glass, foam board, acrylic, tiles, metal, plywood, plastics etc.

Supplied with fully featured ColorPRINT RIP software
Printer Control Software (PCS)
Control panel with Color LCD display

High speed USB 2.0 interface

Operational environment:
Temperature 20 to 28°C, Relative humidity 40 to 70%
Single phase 220to 240V, 50~60 Hz, 7 Amps

Industrial construction: 
Net weight - 590 kg (approx.)
Crated weigth: 680 kg (approx.) 
Uncrated dimensions (in cm): 168 x 155 x 137
Crated dimensions: 191 x 178 x 153

General warranty* - Bluefire TL2024UV printer is warranted against defects in materials and workmanship for a period of one year. Contact distributor for warranty terms & conditions.